This adjustable wrench ensure that you can work on a variety of fasteners without requiring a large number of wrenches by including this adjustable spanner in your toolbox. An adjustable wrench has one fixed jaw and one adjustable jaw which allows you to use it on a wide variety of fastener sizes. The jaws are typically smooth and flat and designed for gripping square and hex nuts. The head of a crescent wrench is usually angled at 22 1/2 degrees to the handle so that the wrench can be flipped over to provide two different gripping positions in tight spaces. An Adjustable wrench is designed so that you can apply pressure on both the fixed and movable jaws, ideally the bulk of your work should be done so that pressure is only applied on the stronger, fixed jaw. Too much pressure on the weaker, adjustable jaw can cause the wrench to break and you to bark a knuckle. When placing the wrench on your nut, the adjustable jaw should be located on the side towards which the rotation is to be performed. This puts the pressure on the fixed jaw.
Free Shipping for Flipkart Plus Members or Make cart value above 500 to avoid shipping Rs. 40. Supermart Products shipping Rs. 50 Extra on order below Rs. 1200. Minimum cart value Rs. 600 required to place supermart order.